Lighting Kit Instructions

Lighting Kit Deployment Instructions Step 1

1 Remove the 360° light from the protective case.

Lighting Kit Deployment Instructions Step 2

2 Insert the light into the top socket of the mast.

Lighting Kit Deployment Instructions Step 3

3 Remove enough cable from the reel for your desired height & deployment needs.

Lighting Kit Deployment Instructions Step 4

4 For powering the light you have two options:

  • 110v power supply (included)
  • 12v receiver hitch 7-way adapter (included)
  1.  

* Note: The lighting system must have an active power source of 12v or 110v before terminating the lighting cable end into the small power case labeled lights.

Lighting Kit Deployment Instructions Step 5

5 Once you have an active power source, remove the small 2’ jumper cable from the lighting case and terminate the jumper end of the cable into the power source and the small 12v power case using the 12v side of that case.

  1.  
Lighting Kit Deployment Instructions Step 6

6 Once complete, it’s now ok to terminate the lighting cable end into the small power case labeled lights.

  1.  
Lighting Kit Deployment Instructions Step 7

7 Use hand or electric pump to elevate mast until desired height is reached.

  1.  
Shopping Cart
Scroll to Top